Rayven Inc. - Specialty coater,
Release-liner manufacturer/supplier
& converter
Rayven is a specialty coater and converter of release liners. We offer silicone coated release film, silicone coated release papers, and non-silicone coated release liners. We offer a high degree of customization with reasonable quantity order sizes, yet our high speed production can also yield economical large quantity runs.
Substrates: Rayven’s primary focus is silicone coated plastic films. Rayven also coat papers, poly coated papers, and fabrics.
Having the ability to coat thin plastic films down to approximately
48 gauge (12um).
Thick materials can be accommodated up to 25 Mils (635um).
Our common substrates include:
- Polyester (PET)
- Biaxially oriented polypropylene
- High density polyethylene
- Low density polyethylene
- Cast polypropylene
- Metalized-PET
- Metalized-BOPP
- Poly-coated paper
- Plastic (Poly)coated linerboard
- Specialty papers
- Polystyrene film
MANUFACTURER / SUPPLIER:
Rayven a competitive manufacturer and supplier of silicone release liners which can be made in widths from 72 inches wide down to 0.5” wide . Our roll sizes can be up to 50 inch diameters for wide widths, and up to 30 inches diameters for narrow slit widths . Rayven is in the industry of manufacturing and supplier of silicone release liners and coating liners for an infinite variety of substrates by using numerous techniques.
CHEMISTRY:
Rayven offer a variety of release chemistries in order to provide solutions for most applications. Rayven has the equipment to coat both solvent and aqueous silicones with thermal curing, plus 100% solids silicone with UV curing. Rayven's proprietary non-silicone release coatings are available for applications that must be silicone free.
SIZES:
Three of our coating lines are dedicated exclusively to release coating. These lines have widths of 60" and 72" at the St. Paul Facility and 72" at the Owatonna Facility. Rayven can supply coated jumbo rolls directly off the coating line, with or without edge trimming. For smaller rolls we have 7 slitters and traverse winding equipment. Rayven often supply narrow slit release liners in pancake or traverse wound rolls for industrial, envelope and packaging applications.
PRINTING:
Rayven offers single color backside printing and coating. Both of our silicone coating lines are equipped with flexographic printing stations.
DUAL SIDE COATING:
Rayven can supply coatings on both sides of the web. These coatings can be silicone, non-silicone, printing, slip, traction, flood coated white (or colors), laser print receptive, or anti static. It is also possible to combine coatings. A typical example of this would be printing with release coating over the print of it.
Contact our sales department to discuss your application.
